Suntracer

602.00 € – 1,021.00 € ( 602.00 € excl. tax /// 722.40 € incl. tax)

All Elsner weather stations are equipped with brightness sensors, wind sensors, precipitation sensors and temperature sensors. They may control without additional equipment shades, shutter, curtains and (outside) lighting.

Clear
SKU: suntracer-fr Category:

Description

Elsner weather stations

All Elsner weather stations are equipped with brightness sensors, wind sensors, precipitation sensors and temperature sensors. They may control without additional equipment shades, shutter, curtains and (outside) lighting.

The Weather Station Suntracer KNX sl for the KNX building bus system measures temperature, wind speed, brightness and air pressure. It recognises precipitation and receives the GPS signal for time and location. In addition, using location coordinates and the time, it calculates the exact position of the sun (azimuth and
elevation).
All values can be used for the control of limit dependent switching outputs. States
can be linked via AND logic gates and OR logic gates. Multi-function modules
change input data as required by means of calculations, querying a condition, or
converting the data point type.
The integrated shade control system allows intelligent sun protection control of up
to 8 façades.
The compact housing of the Suntracer KNX sl accommodates the sensors, evaluation circuits and bus-coupling electronics.

More info and ETS product database

Functions and Operation

  1. Brightness measurement (current light strength)
  2. GPS receiver, outputting the current time and location coordinates. The
    Weather Station Suntracer KNX sl also computes the position of the sun
    (azimuth and elevation)
  3. Shade control for up to 8 façades with slat tracking and shadow edge
    tracking
  4. Wind measurement: The wind strength is measured electronically and thus
    noiselessly and reliably, even during hail, snow and sub-zero temperatures.
    Even turbulent air and rising winds in the vicinity of the device are recorded
  5. Precipitation detection: The sensor surface is heated, so that only drops
    and flakes are recognised as precipitation, but not mist or dew. When the rain
    or snow stops, the sensor is soon dry again and the precipitation warning
    ends
  6. Temperature measurement
  7. Frost protection for shading systems
  8. Air pressure measurement
  9. Weekly and calendar time switch: All time switching outputs can be used
    as communication objects.
    The weekly time switch has 24 periods. Each period can be configured
    either as an output or as an input. If the period is an output, then the switching
    time is set per parameter or per communication object.
    The calendar time switch has 4 periods. Two on/off switching operations,
    which are executed daily, can be set for each period
  10. Switching outputs for all measured and computed values. Threshold
    values can be adjusted per parameter or via communication objects
  11. 8 AND and 8 OR logic gates, each with 4 inputs. All switching events as
    well as 16 logic inputs (in the form of communications objects) can be used
    as inputs for the logic gates. The output of each gate can be configured
    optionally as 1-bit or 2 x 8-bit
  12. 8 multi-function modules (computers) for changing the input data by
    calculations, by querying a condition or by converting the data point type
  13. Summer compensation for cooling systems. A characteristic curve
    matches the target temperature in the room to the external temperature and
    sets the minimum and maximum target temperature values.

Configuration is made using the KNX software ETS. The product file can be downloaded from the Elsner Elektronik website on www.elsner-elektronik.de in the
“Service” menu.

Technical Data

HousingPlastic material
ColourWhite / translucent
MountingOn-wall
Protection categoryIP 44
Dimensionsapprox. 62× 71 × 145(W × H × D, mm)
Weightapprox. 90g
Ambient temperatureOperation -30…+50°C, storage -30…+70°C
Auxiliary voltage12…40 V DC, 12…28 V AC
Auxiliary currentat 12V DC: max. 185 mA
at 24V DC: max. 90 mA
at 24V AC: max. 82 mA
Bus currentmax. 10 mA
Data outputKNX +/- bus terminal plug
Communication objects1387
Heating rain sensorapprox. 1.2 W
Measurement range temperature-30…+80°C
Measurement range wind0…35 m/s
Measurement range brightness0…150 000 lux
Measurement range pressure300 mbar … 1100 mbar

Scope of Delivery

  1. Weather station
  2. Stainless steel installation band for pole installation
  3. 4×50 mm stainless steel roundhead screws and 6×30 mm dowels for wall mounting
  4. Manual with installation instructions (German, English, French, Italian, Spanish)
  5. Product file VD as download (German, English, Fench, Italian, Spanish)

Accessories

  1. Hinge Arm Mounting, for flexible wall, pole or beam mounting
  2. Power Supply Unit 20 V AC

ETS file
>

Suntracer KNX-sl

Weather Station

The Weather Station Suntracer KNX sl light for the KNX building bus system
measures temperature, wind speed and brightness. It recognises precipitation and receives the GPS signal for time and location. In addition, using location coordinates and
the time, it calculates the exact position of the sun (azimuth and elevation).
All values can be used for the control of limit dependent switching outputs. States can
be linked via AND logic gates and OR logic gates. Multi-function modules change input
data as required by means of calculations, querying a condition, or converting the data
point type.
The integrated shade control system allows intelligent sun protection control of up to
5 façades.
The compact housing of the Suntracer KNX sl light accommodates the sensors,
evaluation circuits and bus-coupling electronics.

More info and ETS product database

Functions and Operation

  1. Brightness measurement(current light strength)
  2. GPS receiver, outputting the current time and location coordinates. The
    Weather Station Suntracer KNX sl light also computes the position of the
    sun (azimuth and elevation)
  3. Shade control for up to 5 façades
  4. Wind measurement: The wind strength is measured electronically and thus
    noiselessly and reliably, even during hail, snow and sub-zero temperatures.
    Even turbulent air and rising winds in the vicinity of the device are recorded
  5. Precipitation detection: The sensor surface is heated, so that only drops and
    flakes are recognised as precipitation, but not mist or dew. When the rain or
    snow stops, the sensor is soon dry again and the precipitation warning ends
  6. Temperature measurement
  7. Frost protection for shading systems
  8. Weekly and calendar time switch: All time switching outputs can be used
    as communication objects.
    The weekly time switch has 24 periods. Each period can be configured either
    as an output or as an input. If the period is an output, then the switching time
    is set per parameter or per communication object.
    The calendar time switch has 4 periods. Two on/off switching operations,
    which are executed daily, can be set for each period
  9. Switching outputs for all measured and computed values. Threshold values
    can be adjusted per parameter or via communication objects
  10. 8 AND and 8 OR logic gates, each with 4 inputs. All switching events as well
    as 16 logic inputs (in the form of communications objects) can be used as
    inputs for the logic gates. The output of each gate can be configured optionally
    as 1-bit or 2 x 8-bit
  11. 8 multi-function modules (computers) for changing the input data by
    calculations, by querying a condition or by converting the data point type
  12. Summer compensation for cooling systems. A characteristic curve matches
    the target temperature in the room to the external temperature and sets the
    minimum and maximum target temperature values.

Configuration is made using the KNX software ETS. The product file can be downloaded from the Elsner Elektronik website on www.elsner-elektronik.de in the “Service” menu.

Technical Data

HousingPlastic material
ColourWhite / translucent
MountingOn-wall
Protection categoryIP 44
Dimensionsapprox. 62× 71 × 145 (W × H × D, mm)
Weightapprox. 85g
Ambient temperatureOperation -30…+50°C, storage -30…+70°C
Operating voltage12…40 V DC (12…28 V AC)
Auxiliary currentat 12V DC: max. 185 mA
at 24V DC: max. 90 mA
at 24V AC: max. 82 mA
Bus currentmax. 10 mA
Data outputKNX +/- bus terminal plug
Communication objects864
Heating rain sensorapprox. 1.2 W
Measurement range temperature-40…+80°C
Measurement range wind0…70 m/s
Measurement range brightness0…150 000 lux

Scope of Delivery

  1. Weather station
  2. Stainless steel installation band for pole installation
  3. 4×50 mm stainless steel roundhead screws and 6×30 mm dowels for wall mounting
  4. Manual with installation instructions (German, English, French, Italian, Spanish)
  5. Product file VD as download (German, English, Fench, Italian, Spanish)

Accessories

  1. Hinge Arm Mounting, for flexible wall, pole or beam mounting
  2. Power Supply Unit 20 V AC

ETS file

Suntracer KNX-sl light

Weather Station

The Weather Station Suntracer KNX sl basic for the KNX building bus system
measures temperature, wind speed, brightness and recognises precipitation. All values can be used for the control of limit dependent switching outputs. States can be
linked via AND logic gates and OR logic gates. Multi-function modules change input
data as required by means of calculations, querying a condition, or converting the data
point type.
The compact housing of the Suntracer KNX sl basic accommodates the sensors,
evaluation circuits and bus-coupling electronics.

More info and ETS product database

Functions and Operation

  1. Brightness measurement (current light strength) with 3 sensors. Separate
    values, maximum or mixed value usable
  2. Wind measurement: The wind strength is measured electronically and thus
    noiselessly and reliably, even during hail, snow and sub-zero temperatures.
    Even turbulent air and rising winds in the vicinity of the device are recorded
  3. Precipitation detection: The sensor surface is heated, so that only drops and
    flakes are recognised as precipitation, but not mist or dew. When the rain or
    snow stops, the sensor is soon dry again and the precipitation warning ends
  4. Temperature measurement
  5. Frost protection for shading systems
  6. Switching outputs for all measured and computed values. Threshold values
    can be adjusted per parameter or via communication objects
  7. 8 AND and 8 OR logic gates, each with 4 inputs. All switching events as well
    as 16 logic inputs (in the form of communications objects) can be used as
    inputs for the logic gates. The output of each gate can be configured optionally
    as 1-bit or 2 x 8-bit
  8. 8 multi-function modules (computers) for changing the input data by
    calculations, by querying a condition or by converting the data point type

Configuration is made using the KNX software ETS. The product file can be downloaded from the Elsner Elektronik website on www.elsner-elektronik.de in the “Service” menu.

Technical Data

HousingPlastic material
ColourWhite / translucent
MountingOn-wall
Protection categoryIP 44
Dimensionsapprox. 62× 71× 145(W × H × D, mm)
Weightapprox. 85g
Ambient temperatureOperation -30…+50°C, storage -30…+70°C
Operating voltageAvailable for 230 V AC or for 24 V DC (20 V AC)
Currentat 12V DC: max. 185 mA
at 24V DC: max. 90 mA
at 24V AC: max. 82 mA
Data outputKNX +/- bus terminal plug
Communication objects341
Heating rain sensorapprox. 1.2 W (230 V and 24 V)
Measurement range temperature-40…+80°C
Measurement range wind0…70 m/s
Measurement range brightness0…150 000 lux

Scope of Delivery

  1. Weather station
  2. Stainless steel installation band for pole installation
  3. 4×50 mm stainless steel roundhead screws and 6×30 mm dowels for wall mounting
  4. Manual with installation instructions (German, English, French, Italian, Spanish)
  5. Product file VD as download (German, English, Fench, Italian, Spanish)

Accessories

  1. Hinge Arm Mounting, for flexible wall, pole or beam mounting
  2. Power Supply Unit 20 V AC for the 24 V DC (20 V AC) version

ETS file

Suntracer KNX sl basic

Weather Station

 

Additional information

Weight0.17 kg
Dimensions10 × 8 × 12 cm
Model

sl basic, sl light, sl